Communicate with Supplier? Supplier
Anna Ms. Anna
What can I do for you?
Contact Supplier

Wei fang junlong precision casting Co.,Ltd

News

Home > News > Forgings and Foundri

Forgings and Foundri

2019-10-03

The term ìcastings and forgingsî refers in general to those metal items made in foundries and forges, respectively. Examples of castings and forgings include: automotive crankshafts, bearing caps, axle carriers, axle tubes, valve bodies, turbine housings, splines, suspension brackets, spring hangers, flanges, gear blanks and more.

Foundries and forges are both facilities in which whole metal parts are made, though they do so using very different techniques. As implied, foundries are used to make castings, while forges are used to make forgings. However, because the casting and forging products can be so similar, people often incorrectly refer to forges as foundries. Read on to understand the difference in their respective processes.

To make castings, which have mid to high tolerances, manufacturers use closed molds, high pressure, high heat and molten metal. During casting, manufacturers heat metals until they are molten and then pour them into dies or molds, where they take on that vesselís shape. Techniques manufacturers in forges use include hot and cold hammering and stamping of solid metal pieces. In other words, castings are made through the manipulation of molten metal, while forgings are made through the application of mechanical and thermal energy on solid metal.

Casting processes can be divided into categories including: permanent mold casting, grey iron casting, sand casting, rapid casting, Investment casting and die casting. Forging processes can also be subdivided. Some of their categories include: hot forging, warm forging, cold forging, drop forging, open-die forging, impression forging and press forging.

All sorts of metals can be cast and forged. Metals that are typically used in both casting and forging include: steel, stainless steel, iron, aluminum and titanium. Materials used more exclusively in casting include: magnesium, copper, tin and zinc. In addition to regular metal casting, the casting process can also accommodate plaster, plastic resin, concrete and other chemical curing materials.

Castings and forgings each have their own sets of pros and cons. For example, while forgings are typically limited in size and weight, there is virtually no limit on the potential size or weight of castings. In addition, the casting process allows for the creation of much more complex and intricate parts. Also, because metal is molten during casting, it is much easier for manufacturers to add extra metals to the mix as they create new parts. So, castings are often made from custom alloys. This is rarely the case of forgings. Nevertheless, the process of forging allows manufacturers to create parts with tight grain structures. Because these grain structures give the forgings very high levels of wear resistance and mechanical strength, they are often just as strong as super expensive alloys. Also, forgings avoid several problems faced by castings, including: cavities, porosity, shrinkage and cold pour issues.

It's hard to say whether castings or forgings are cheaper in the long run, as the processes used to make each have their advantages and disadvantages. For the best advice, we recommend that you consult with an experienced casting and forging sales company or manufacturer

junlong precision castings

Send Inquiry

Anna

Ms. Anna

Email:

info@Junlongcast.com

Send Inquiry

Tel:86-0536-7669966

Fax:86-0536-7669966

Mobile Phone:+8618363688899

Email:info@Junlongcast.com

Address:No 2084,eight road.Fangzi district , Weifang, Shandong

Mobile Site

http://www.junlongcasting.com