- Carbon Steel / Alloy Steel / Stainless Steel /Castings
- Train Parts Castings
- Auto Parts Castings
- Forklift Parts Castings
- Truck Parts Castings
- Railway Parts Castings
- High Chromium Steel Castings
- Mechanical Parts Castings
- Agricultural Machinery Parts Casting
- Pump Valve Castings
- Petroleum Machinery Castings
- Mining Machinery Castings
- Ship Parts Castings
- Pipe Fittings Castings
- Contact Person: Ms. Anna
- View Contact Details
The process and management features of Weifang Junlong
1. In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.
2. In dipping slurry process,most of the suppliers adopt water glass technics in domestic area,but we adopt compound technics or silica sol technics.As you know,Carbon Steel Castings will be much smoother with compound technics (compound of water glass and silica sol technics),this method is so popular with our customers, and the quality is higher than water glass technics, the cost is lower than silica sol technics.
3. In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
5. In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of.This can effectively avoid the air-hole and sand-hole,making the casting look much nicer.
6. In smelt process,we use middle frequency furnace,avoiding the emergence of the oxide; in molten steel control part,we use Germany-imported direct reading spectrometer machine,assuring its quality before the molten steel out of the furnace.During this process we use ERP production and management software to get the feedback information.
8. In shot-blasting process,we have crawler-type and hanging shot-blasting machine,with steel shot 0.5-0.8,making the products smooth.Of course,if the customer wants it look much nicer,we also can carry out sand-blast treatment.
9. In heat treatment process,we use electric furnace,and adopt double-temperature control in order to heat the products equally.As a result, the products will have great metallurgical structure.
10. Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.
12. Before package,we use the automatic drying machine to heighten the drying efficiency and make special treatment against rust in the transportation.
13. About package,we adopt Europe standardized fumigation-free wooden case.
14. About dimension measurement, we have 2 three-coordinates measuring machines; and about hardness measurement, we have brinell hardness tester and Rockwell hardness tester.